UPS dropped some stuff off today!
Spintech Muffler 3"D/25"d 3" Summit x pipe kit
Looking forward to the install, I can see now that I will have to work on the x pipe a little bit but that shouldn’t be a problem with the Miller by my side.
Speaking of ghetto fabrication, my clutch line gave me fits…
I first tried a braap modified line which ended up being incorrect for a ’99 M3. I also figured out that there are now 4 different master cyl configurations…
- Early e36 threaded line
- Early e36 with clip
- 96-98 e36 with clip
- 99/late production recessed master inside firewall with clip
Because of those issues I then took a -3 an to 10mmx1.5 adapter and welded it to the original master cyl fitting.
Ghetto Fabbed Clutch Line
This thing works like a charm!
Another issue I ran into along the way was the fan shroud that I ordered does not fit well with the LS motor…
Fan clearance is not optimum...
So with that I am still hunting ideas and am using the stock shroud at the moment. I have my eye on a few oem cooling fans that look like they might fit the bill quite nicely.
